page 1 of 4 order code input voltage range output voltage output current max. effciency typ. tim 3.5-0911 5.0 vdc 700 ma 77 % tim 3.5-0919 9.0 vdc 389 ma 78 % tim 3.5-0912 4.5 C 12 vdc 12 vdc 292 ma 81 % tim 3.5-0913 (9 vdc nominal) 15 vdc 234 ma 81 % tim 3.5-0915 24 vdc 146 ma 81 % tim 3.5-0922 12 vdc 146 ma 81 % tim 3.5-0923 15 vdc 117 ma 81 % tim 3.5-1211 5.0 vdc 700 ma 79 % tim 3.5-1219 9.0 vdc 389 ma 80 % tim 3.5-1212 9.0 C 18 vdc 12 vdc 292 ma 82 % tim 3.5-1213 (12 vdc nominal) 15 vdc 234 ma 82 % tim 3.5-1215 24 vdc 146 ma 82 % tim 3.5-1222 12 vdc 146 ma 82 % tim 3.5-1223 15 vdc 117 ma 82 % tim 3.5-2411 5.0 vdc 700 ma 79 % tim 3.5-2419 9.0 vdc 389 ma 80 % tim 3.5-2412 18 C 36 vdc 12 vdc 292 ma 82 % tim 3.5-2413 (24 vdc nominal) 15 vdc 234 ma 83 % tim 3.5-2415 24 vdc 146 ma 82 % tim 3.5-2422 12 vdc 146 ma 82 % tim 3.5-2423 15 vdc 117 ma 83 % tim 3.5-4811 5.0 vdc 700 ma 79 % tim 3.5-4819 9.0 vdc 389 ma 80 % tim 3.5-4812 36 C 75 vdc 12 vdc 292 ma 81 % tim 3.5-4813 (48 vdc nominal) 15 vdc 234 ma 82 % tim 3.5-4815 24 vdc 146 ma 81 % tim 3.5-4822 12 vdc 146 ma 81 % tim 3.5-4823 15 vdc 117 ma 82 % models the tim 3.5 series is a range of 3.5 watt dc/dc converters in compact dip-16 package and with reinforced isolation of 5000 vacrms for medical applications. with a low leakage current of less than 2 a the converters are predestined to insulate electrical equipment from the applied parts to patient (bf classifcation). the models are approved to iec/en/es 60601-1 3rd edition for 2xmopp up to an altitude of 5000m and come along with an iso 14971 risk management fle. ? compact dip-16-package ? i/o isolation 5000 vacrms rated for 250 vacrms working voltage ? certifcation according to iec/en/es 60601-1 3rd edition for 2xmopp and opperation to 5000 m altitude ? low leakage current < 2 a for bf-applications ? extended operating temperature range C40c to 90c. ? emc compliance to iec 60601-1-2 4th edition and en55032 class a ? 5-year product warranty www.tracopower.com dc/dc converter tim 3.5 series, 3.5 watt
page 2 of 4 input specifications input current no load 90 ma typ. 50 ma typ. 30 ma typ. 13 ma typ. surge voltage 15 v max. 25 v max. 50 v max. 48 vin models: 100 v max. start-up voltage 9 vin models: 4.5 vdc (or lower) 12 vin models: 9.0 vdc (or lower) 18 vdc (or lower) 48 vin models: 36 vdc (or lower) startup time 10 ms typ. / 20 ms max. under voltage shut down 9 vin models: 2 - 4 vdc 12 vin models: 6 - 8 vdc 13 - 17 vdc 48 vin models: 29 - 35 vdc input filter capacitor type conducted noise C conducted radiated input suppression en 55011 limits to iec/en 60601-1-2 4th edit. en 55032 class a or b with external components C application note for filter class a/b proposal www.tracopower.com/overview/tim3 emc immunity C eneric for medical equipment iec/en 60601-1-2 4th edition C esd (electrostatic discharge) en 61000-4-2, air 15 kv, contact 8 kv, perf. criteria a C adiatd immunit en 61000-4-3, 10 v/m, perf. criteria a C fat tranint / urg en 61000-4-4, 2 kv, perf. criteria a (it trna inut caacitor / diod) en 61000-4-5, 1 kv perf. criteria a vin mod 1 vin mod 48 vin models: C conducted immunity en 61000-4-6, 10 vrms, perf. criteria a C magnetic field immunity en 61000-4-8 100 a/m, continuous, perf. criteria a 1000 a/m, 1 sec., perf. criteria a external input fuse required 9 vin models: 1.6 a (slow blow) 12 vin models: 0.8 a (slow blow) 24 vin models: 0.5 a (slow blow) 48 vin models: 0.315 a (slow blow) output specifications voltage set accuracy 1 % max. regulation C input variation (vin min. to vin max.) 0.2 % max. C load variation (0 C 100 %) 1 % max. C load variation (10 C 90 %) single output: 0.5 % max. dual output: 0.8 % max. C cross regulation dual output: 5.0 % max. (asymmetrical load 25 / 100 %) minimum load not required ripple and noise (20 mhz bandwidth) 5 - 15 vout models: 50 mvp-p typ. 24, 12 15 vout models: 75 mvp-p typ. transient response (25% load step change) C cor tim 500 s typ. short circuit protection continuous, automatic recovery tim 3.5 series, 3.5 watt www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 4 general specifications overvoltage protection 5.0 vdc models: 6 - 8 vdc 9.0 vdc models: 10 - 14 vdc 12 vdc models: 13 - 19 vdc 15 vdc models: 16 - 22 vdc 24 vdc models: 25 - 35 vdc capacitive load C single output 5.0 vdc models: 1470 f max. 9.0 vdc models: 680 f max. 12 vdc models: 470 f max. 15 vdc models: 330 f max. 24 vdc models: 170 f max. C dual output 12 vdc models: 220 f max. (each output) 15 vdc models: 160 f max. (each output) temperature ranges C operating (natural convection: 20 lfm, 0.1 m/s) C40c to +90c C case temperature +105c max. C storage temperature C55c to +125c derating 3.3 %/k above 75c humidity (non condensing) 5 % to 95 % rel h max. isolation voltage (50 hz, 60 s) 5000 vac (reinforced insulation) working voltage 250 vac, 2 x mopp isolation capacitance 20 pf max. clearance/creepage 8 mm min. leakage current ( at 240 vac, 60 hz) 2 a max. altitude during operation 5000 m max. temperature coefficient 0.02 %/k max. reliability, calculated mtbf (mil-hdbk-217f at +25c, ground benign) 5041000 h switching frequency 100 khz min. (frequency modulated) shock, vibration and thermal shock resistance according to mil-std-810f remote on/off C on: open circuit or high impedance C off: 2 C 4 ma current applied via 1kohm resistor C off idle current: 2.5 ma typ. safety standards/approvals C medical equipment ansi/aami es60601-1:2005/(r)2012, iec/en60601-1 3rd edition C certification documents www.tracopower.com/overview/tim3 environmental compliance C reach www.tracopower.com/info/reach-declaration.pdf C rohs rohs directive 2011/65/eu physical specifications casing material non-conductive black plastic base material non-conductive black plastic potting material silicone (ul94 v-0) package weight 7.0 g (0.24 oz) soldering temperature 260c / 10 s max. tim 3.5 series, 3.5 watt www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
www .tracopowe r. com ? copyright 2018 traco electronic ag sp ec i?cati ons can be changed wi thout noti ce! page 4 of 4 1 2 7 8 16 24.3 (0.95) 14.4 (0.57) 10.16 (0.400) 2.1 (0.08) ? 0.60 (0.0024) 10.2 (0.40) 3.8 (0.15) bottom view 10 9 15.24 (0.600) 2.54 (0.100) 3.2 (0.13) outline dimensions pin single dual 1 Cvin (gnd) Cvin (gnd) 2 on/off on/off 7 nc nc 8 nc common 9 +vout +vout 10 Cvout Cvout 16 +vin (vcc) +vin (vcc) standard pinout dimensions in mm (inch) tolerances 0.5 (0.02) pin ? 0.6 0.1 (0.024 0.004) pin pitch tolerances 0.25 (0.01) tim 3.5 series, 3.5 watt rev. july 26, 2018
|